APKT 1604 Cemented CNC Milling Inserts High Efficiency For Stainless Steel

Quick Detail:

• Excellent steel
• Hard and wear-resistant
• Rapid cutting
• High cost performance
• Shock and vibration resistance

Description:

• APKT carbide insert adopts high strength edge design, combined with dual post-processing technology, which has better impact resistance and can withstand greater feed;
• The new PVD coating and atomic rearrangement technology match the hardness, toughness and thermal stability of the coating.
• Structural optimization design can greatly improve the quality of the machined surface and improve the processing performance of the slope;
• The overall strength of the blade has been greatly improved, and the overall anti-collapse performance is excellent;
• Unique coating post-treatment technology makes the surface smoother

Specifications:

Lead Time:

Notice:

• The APKT1604 tungsten carbide inserts shall not be collided or dropped on the ground and must be handled with care.
• Before installing the carbide blade, the performance and purpose of the saw table must be confirmed to ensure that the cutting direction indicated by the blade arrow is consistent with the rotation direction of the saw table. It is strictly prohibited to install in the opposite direction. Wrong installation direction may cause the blade sawtooth to fall off, so as to prevent accidents.
• After installation, it is necessary to confirm whether the central hole of the carbide blade is firmly fixed on the flange plate of the saw table. If there is a gasket, the gasket must be sleeved; Then, gently push with your hand to confirm whether the blade rotates eccentrically.
• When using, do not exceed the specified high speed
• When the cemented carbide blade is not used, hang the blade vertically on the dry shelf.​

Applications:

Our tungsten carbide inserts could to be processed Alloy steel, Tool steel, carbon steel, stainless steel, Cast iron and Titanium alloy. Working material as following: