Tungsten Carbide Grooving Insert Tools Mrmn200 Mrmn500 Cast Iron Mrmn300 Mrmn400

Quick Detail:

• Sharp cutting
• Smooth cutting
• It is not easy to stick the knife
• Good finish
• Wear resistant and durable

Description:

• The carbide grooving insert is made of superfine raw cemented carbide, finely ground and sintered at high temperature. The overall impact resistance of the blades is strong, and the blades are not easy to collapse; The blade adopts Balchas coating process. The blade has excellent toughness and heat resistance, and has small chemical affinity. The chip can be removed smoothly during processing without sticking to the blade, reducing the number of tool changes, improving the processing efficiency and reducing the loss rate of the blade; Reasonable chip removal groove design, coupled with high-precision peripheral grinding to make the blade sharp, can easily deal with continuous/intermittent cutting, smooth chip removal to avoid chip buildup, so that processing is more efficient.

Specifications:​

Lead Time:

Notice:

• The tungsten carbide grooving insert shall not be collided or dropped on the ground and must be handled with care.
• Before installing the carbide grooving insert, the performance and purpose of the saw table must be confirmed to ensure that the cutting direction indicated by the blade arrow is consistent with the rotation direction of the saw table. It is strictly prohibited to install in the opposite direction. Wrong installation direction may cause the blade sawtooth to fall off, so as to prevent accidents.
• After installation, it is necessary to confirm whether the central hole of the carbide grooving insert is firmly fixed on the flange plate of the saw table. If there is a gasket, the gasket must be sleeved; Then, gently push with your hand to confirm whether the blade rotates eccentrically.
• When using, do not exceed the specified high speed
• When the cemented carbide grooving insert is not used, hang the blade vertically on the dry shelf.

Applications:

Our tungsten carbide grooving insert could to be processed Alloy steel, Tool steel, carbon steel, stainless steel, Cast iron and Titanium alloy. Working material as following:

FAQ