Carbide Lathe Insert Threading Turning External 22ir 22er 3.5 4.0 4.5 5.0 5.5 6.0 Iso

Quick Detail:

• High hardness
• High-precision
• Good toughness
• Impact resistance
• Accurate size
• Precision machining
• increase of efficiency

Description:

• 22ER 2.0 ISO carbide lathe insert are made of high-quality tungsten steel alloy, which is wear-resistant and durable overall, with smooth and polished surface and effective corrosion resistance; The spiral groove is finely ground to reduce the cutting resistance, and the cutting is stable without chip accumulation, so as to avoid tool clamping and greatly improve the production efficiency; The whole blade anti-seismic design can restrain chatter during machining and improve the quality of machined surface; Highly polished, better impact resistance

Specifications:​

Lead Time:

Notice:

• The carbide lathe insert shall not be collided or dropped on the ground and must be handled with care.
• Before installing the carbide lathe insert , the performance and purpose of the saw table must be confirmed to ensure that the cutting direction indicated by the blade arrow is consistent with the rotation direction of the saw table. It is strictly prohibited to install in the opposite direction. Wrong installation direction may cause the blade sawtooth to fall off, so as to prevent accidents.
• After installation, it is necessary to confirm whether the central hole of the carbide lathe insert is firmly fixed on the flange plate of the saw table. If there is a gasket, the gasket must be sleeved; Then, gently push with your hand to confirm whether the blade rotates eccentrically.
• When using, do not exceed the specified high speed
• When the carbide lathe insert is not used, hang the blade vertically on the dry shelf.

Applications:

Our carbide lathe insert could to be processed Alloy steel, Tool steel, carbon steel, stainless steel, Cast iron and Titanium alloy. Working material as following: