Tnmg 160404 160408 160412 CNC Carbide Lathe Insert Blade Turning Cutting Tool Metal

Quick Detail:

• High hardness
• Sharp cutting
• High wear resistance
• High finish
• Long service life

Description:

• Tnmg belongs to tungsten carbide lathe insert, which is processed by German technology, and has excellent comprehensive properties such as high hardness, high wear resistance, high finish, etc; Spraying with stress accumulation method below 1000 degrees, the coating is thicker and the processing is more stable; High precision blade can effectively reduce cutting friction, reduce blade wear and prolong tool life.

Specifications:​

Lead Time:

Notice:

• The tungsten carbide inserts shall not be collided or dropped on the ground and must be handled with care.
• Before installing the carbide blade, the performance and purpose of the saw table must be confirmed to ensure that the cutting direction indicated by the blade arrow is consistent with the rotation direction of the saw table. It is strictly prohibited to install in the opposite direction. Wrong installation direction may cause the blade sawtooth to fall off, so as to prevent accidents.
• After installation, it is necessary to confirm whether the central hole of the carbide blade is firmly fixed on the flange plate of the saw table. If there is a gasket, the gasket must be sleeved; Then, gently push with your hand to confirm whether the blade rotates eccentrically.
• When using, do not exceed the specified high speed
• When the tungsten carbide inserts is not used, hang the blade vertically on the dry shelf.

Applications:

Our tungsten carbide inserts could to be processed Alloy steel, Tool steel, carbon steel, stainless steel, Cast iron and Titanium alloy. Working material as following: